Insulation Company in Universal City, TX
Most insulation work in Universal City comes down to one thing: homes built for a different climate, now fighting Texas heat with 1960s-era materials. We’re Laurel Attic Insulation, part of the Relay Home Co. family, and we handle attic insulation, spray foam, and insulation removal across Universal City with upfront pricing and a written guarantee on every job. If your cooling bill feels like a second mortgage, call (254) 279-0971 and we’ll tell you exactly what’s in your attic and what it should be.
Why Universal City Homes Are Different
Universal City grew up around Randolph AFB, and that shows in the housing stock. Many homes in the older sections near Pat Booker Road date from the 1950s through the 1970s, built quickly to early base housing standards. Walk into one of those attics and you’ll typically find a few inches of settled fiberglass, often less than R-11, with no radiant barrier and minimal air sealing. The result is a house that bakes from the top down every summer.
Base-era construction also means low-pitched roofs, pier-and-beam or slab foundations, and wall cavities that often have no insulation at all. Additions tacked on over the years are frequently uninsulated too, so one part of the house can be comfortable while another cooks. Universal City’s humid summers make moisture a real factor: older homes often lack any vapor barrier, which means insulation has to be chosen and installed with humidity in mind, not just heat. We account for that on every Universal City job.
Our Main Universal City Services
Most Universal City homeowners call us about two things: bringing an under-insulated attic up to modern standards, and starting fresh when old insulation has been compromised. Here’s what each involves locally.
Attic Insulation in Universal City
In Universal City’s older neighborhoods, attic insulation is usually the single biggest lever on your electric bill. We assess what’s up there now, then add blown-in cellulose or fiberglass to hit the R-value your home needs, along with air sealing around penetrations. On mid-century homes with low-pitched roofs, we’re careful about eave ventilation so you don’t trade high cooling costs for moisture problems. Learn more about how we approach Attic Insulation in Universal City.
Spray Foam Insulation in Universal City
Spray foam makes sense in Universal City when you want to seal the building envelope, not just slow heat transfer. Open-cell foam works well in attics and walls where humidity control matters, and closed-cell adds structural rigidity that older pier-and-beam homes sometimes benefit from. The material choice depends on your roof pitch, existing insulation, and whether the space is vented. Details are on the Spray Foam Insulation in Universal City page.
Insulation Removal in Universal City
Homes built around Randolph AFB decades ago often have fiberglass that’s compacted, dust-choked, or damaged by rodents and moisture. We remove it cleanly, sanitize where needed, and prep the space for new insulation. It’s a required step before any upgrade if the old material is wet, moldy, or so thin it’s doing nothing. See how Insulation Removal in Universal City works and when it’s necessary.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Universal City
We install and remove insulation from the brands homeowners in Universal City actually ask for: Owens Corning, Demilec, GreenFiber, and Johns Manville among them. The right material depends on your attic configuration, and we’ll match it to the job rather than whatever’s on the truck. Learn more on our brands page.
Pricing for Insulation Company in Universal City, TX
| Service | Typical range in Universal City |
|---|---|
| Attic insulation (full upgrade, average 1,500 sq ft home) | $1,200 – $2,800 |
| Attic insulation (small area or top-up) | $500 – $1,000 |
| Spray foam attic (open-cell, full attic) | $2,200 – $5,000 |
| Spray foam attic (open-cell, partial or knee wall) | $800 – $1,800 |
| Closed-cell spray foam (per square foot, 1″ – 2″) | $1.50 – $3.00 per sq ft |
| Insulation removal (full attic cleanout) | $900 – $2,400 |
| Insulation removal (small attic or partial) | $400 – $900 |
| Blown-in fiberglass (standard attic, per sq ft) | $1.00 – $2.00 per sq ft |
| Blown-in cellulose (standard attic, per sq ft) | $0.80 – $1.60 per sq ft |
| Radiant barrier installation | $600 – $1,400 |
In Universal City, prices push higher when an attic has low clearance, old wiring that needs to be worked around, or existing insulation that requires removal first. Homes near Randolph AFB with very low-pitched roofs often take extra time for access. Whatever the number is, you’ll get it in writing before any work starts.
Neighborhoods We Serve in Universal City
We work across Universal City, from the established streets near Randolph AFB to the newer developments further out. If you’re in any of these areas, we’re close by and can typically be out within a day or two for an estimate.
- Pat Booker Road corridor
- Randolph AFB-area neighborhoods
- Universal City Heights
- Kitty Hawk Road area
- Older sections near Olympic Drive
Service Area – Cities Near Universal City
If you’re on the edge of Universal City or just over the line, we likely cover you too. We also serve Converse, TX and San Antonio, TX from the same dispatch, so the same crew and the same written guarantee apply whether you’re two blocks or two exits away.
Serving Universal City, TX - Our Local Coverage Area
We’re based in the Universal City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Universal City
Estimates in Universal City are usually scheduled within one to two days. Since dispatch and scheduling run through our San Antonio office, we keep crews routed across Universal City regularly, which means short lead times for both estimates and installation. Call (254) 279-0971 and we’ll give you a specific window.
Most insulation work doesn’t require a permit in Universal City, but some HOAs, particularly in newer subdivisions, ask for notice before exterior-visible work begins. Attic and interior insulation is generally exempt. We’ll flag any concerns when we look at your property and can provide documentation if your HOA wants it.
Yes. The mid-century homes around Randolph AFB are some of the most common jobs we do in Universal City. We’re familiar with the low-pitched roofs, minimal original insulation, and uninsulated additions typical of that housing stock, and we plan each job around those realities rather than treating every attic the same.
If you’re ready to find out what’s actually in your attic and what it would cost to fix it, call (254) 279-0971. Chase Whitaker and the Laurel Attic Insulation team will give you a straight answer and a written price, whether you’re in an old base home off Pat Booker Road or a newer build on the edge of town.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Universal City Customers Say
"Easy to book and easy to pay. The invoice came by text and I paid it from the driveway."
- Rudy B."Good job. The crew arrived about 30 minutes late, but the tracker showed it."
- Pete K."Utility bill dropped the next month. Our summer electric bill was lower by a visible amount."
- Gary J.