Reflectix Insulation in Selma, TX | Laurel Attic Insulation San Antonio
We provide independent Reflectix service across Selma, TX. We’re not a manufacturer-authorized dealer, and we’ll tell you that straight. What sets our work apart here is simple: we know how Reflectix behaves in Selma’s specific housing stock, from 1990s starter homes off Retama Parkway to newer builds in River Bend. Most reflective insulation fails in this area because of how it was installed, not because the product gave out. Call (254) 279-0971 and we’ll take a look.
Why Selma Residents Choose Us for Reflectix Service
Chase Whitaker, our owner, has spent two decades in attics and crawlspaces across South Texas, and his crews pull Reflectix off roof decks in Selma on a regular basis. That daily exposure matters because reflective insulation fails in predictable ways here. Staples pull loose from heat cycling. Dust settles on horizontal runs. Seams get taped wrong, or never taped at all. When you call us, you’re getting someone who has seen every version of that failure in Selma attics and knows what actually fixes it.
We’re an independently owned and operated business within the Relay Home Co. family, founded in 2003. We carry genuine Reflectix foil, tape, and fasteners so replacements match what’s already up there. No authorization from Reflectix, no dealership badge. Just honest service and a written price before we touch anything. That’s Reflectix sales & service done the way it should be.
Common Reflectix Insulation Problems We Solve in Selma
- Sagging or fallen radiant barriers. Selma summers push attic temperatures well past 140°F, and the humidity works on staples over time. Heat cycling expands and contracts the foil, the staples loosen, and sections droop or drop entirely. We see this most often in vented attics where the original install used short staples or missed the rafters.
- Dust-filled reflective surfaces. Selma’s subdivisions sit in a construction corridor, and fine dust settles on horizontal Reflectix runs. That layer cuts reflectivity by up to 50%, which means the barrier is doing half its job. Cleaning reflective foil is rarely worth the labor. In most cases, replacement is the smarter dollar.
- Inverted foil orientation. Roughly one in five pre-2000 Selma homes we inspect has Reflectix stapled with the shiny side facing the wrong direction. The foil reflects attic heat down onto the insulation instead of back toward the roof. It’s a silent efficiency killer that most homeowners never notice.
- Untaped seams and convective loops. In 1990s attics with existing blown-in fiberglass, gaps at Reflectix seams let air circulate behind the barrier. That convective loop destroys the whole point of the radiant barrier. We tape every seam properly and verify the air gap is maintained.
- Condensation during freezes. When Reflectix gets used as a vapor barrier on the wrong side of a wall assembly, Selma’s occasional hard freezes create condensation. Moisture trapped against the foil leads to mold and rot. We reinstall it correctly or recommend a different product for that location.
Reflectix Service in Selma: What Local Conditions Mean for Your Equipment
Here’s the thing about Selma that changes how we approach Reflectix work. This city grew in a very specific pattern: a wave of 1990s starter homes built fast, then a second wave of 2000s custom and builder-grade construction. The 1990s tract homes, especially around Retama Ridge, were insulated to code at the time, which meant R-19 or less in the attic. Twenty-plus years of settling later, many are sitting under R-20. The AC ducts in those vented attics are often uninsulated metal or thin flex, bleeding up to 30% of cooling into the attic. Reflectix can make a real difference in those attics, but only when it’s installed as part of a proper roof-deck radiant barrier system, not stapled flat against the insulation. We assess each attic as a system, not just a place to hang foil.
At a home off Retama Parkway, our tech found Reflectix single reflective insulation stapled directly to the underside of roof rafters, shiny side facing the attic floor. It was reflecting summer attic heat down onto the existing R-19 fiberglass. The homeowner had no idea. We removed the foil, reinstalled it as a proper roof-deck radiant barrier with the reflective side facing down, taped all seams, and added ventilation baffles. The upstairs temperature dropped five degrees within a week. That’s not a product problem. That’s an installation problem, and Selma has a lot of them.
Reflectix Models & Products We Service in Selma
We work with the full Reflectix line you’re likely to find in Selma homes: Double Reflective Insulation (ST16025), Single Reflective Insulation, Radiant Barrier (RB48125), and Concrete Slab Insulation. For reflective installs, we use genuine Reflectix foil, tape, and fasteners. Where a hybrid retrofit makes sense, we pair Reflectix with new blown-in fiberglass or spray foam from quality suppliers. We don’t layer new foil over degraded materials and call it fixed. If the existing Reflectix is torn, heavily dust-contaminated, or installed wrong, replacement usually beats repair on cost and performance. Most common Reflectix products and fasteners are stocked on our trucks, so Selma jobs move quickly.
We’re a local Selma service area contractor, not a national chain. That means the crew showing up understands the homes here and the conditions that make Reflectix work or fail.
Reflectix Service Pricing in Selma
| Service | Typical Range in Selma |
|---|---|
| Attic radiant barrier inspection | Free with service call |
| Roof deck radiant barrier install (Reflectix RB48125) | $1,100 – $2,300 depending on attic size |
| Attic floor radiant barrier over existing insulation | $800 – $1,600 |
| Garage ceiling spray foam + Reflectix hybrid | $1,400 – $2,800 |
| Reflectix removal and correct reinstall | $600 – $1,400 |
Your price depends on attic square footage, joist spacing, how much old material needs to come out, and whether we’re pairing the foil with new blown-in fiberglass or spray foam. Every estimate is written and delivered before work starts, so you know the number before we set foot in the attic. Call (254) 279-0971 for a free estimate. Exact pricing for your Selma home takes about 20 minutes to determine.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Reflectix Insulation in Selma
Dust settles on horizontal reflective surfaces in Selma’s windy, construction-heavy air, and yes, it hurts performance significantly. A layer of fine dust can cut reflectivity by up to 50%, which means your radiant barrier is doing half its job. Cleaning foil is usually not worth the labor; replacement is typically the better call. Call (254) 279-0971 and we’ll assess whether yours is salvageable.
Reflectix radiant barrier is not a substitute for blown-in or batt insulation. It reflects radiant heat but does not slow conductive heat transfer the way fiberglass or cellulose does. In Selma’s climate, you need both: an air gap, a reflective surface facing the right direction, and proper R-value insulation below. We’ll tell you what your attic actually needs, even when that means a smaller Reflectix job.
Reflectix products can be part of a code-compliant assembly, but they generally can’t carry the R-value load on their own. Selma follows Texas energy code requirements, which call for R-38 attic insulation in new construction. A radiant barrier earns a separate energy credit in many cases, but it doesn’t replace R-38. If you’re planning a remodel and want to use Reflectix, call (254) 279-0971 and we’ll help you navigate what passes inspection.
Condensation on foil during a freeze usually means the Reflectix was installed as a vapor barrier on the wrong side of the wall assembly. Warm, moist indoor air hits the cold foil surface and condenses. This is a common problem in Selma homes where reflective insulation was used in exterior walls without proper placement. The fix often means reinstalling it correctly or using a different product. Don’t ignore it: trapped moisture leads to mold and rot.
The fastest check: look at which side of the foil faces the attic floor. If the shiny side points down toward the insulation, it’s reflecting heat into your attic instead of back toward the roof. Our crews find this inverted orientation on about one in five pre-2000 Selma homes we inspect. A quick visual inspection with photos will tell you. Call (254) 279-0971 and we’ll check it for free as part of a service call.
Service Areas Near Selma
We serve Selma and the surrounding communities, including San Antonio, Converse, Alamo Heights, Windcrest, and Leon Valley. If you’re in a 1990s tract home or a newer builder-grade subdivision anywhere in this corridor, the Reflectix problems are usually the same and we can help. Learn more about Reflectix service in Converse or Reflectix service in San Antonio.
Book Your Reflectix Service in Selma Today
If your Reflectix is sagging, dusty, taped wrong, or facing the wrong direction, we can fix it. Same-day appointments are often available for Selma homeowners. Call (254) 279-0971 for a free estimate and a written price before we start. You’ll get live technician tracking and before-and-after photos on every job.
Written by Chase Whitaker, Owner at Laurel Attic Insulation San Antonio, serving Selma and the surrounding communities since 2003.