Insulation Company in Selma, TX
Insulation work in Selma, TX is shaped by two very different home types sitting side by side: 1990s starter homes with settled fiberglass batts and brand-new builder-grade houses with code-minimum coverage. The result is a city where attic insulation is often below current R-38 requirements, and nobody realizes it until the July AC bill arrives. Laurel Attic Insulation handles both realities. We retrofit older Selma homes, bring newer homes up to what Texas heat actually demands, and put a written price in your hand before anything starts. Call (254) 279-0971 and we’ll walk you through what your attic actually needs.
Why Selma Homes Are Different
Selma sits just northeast of San Antonio along the I-35 corridor, and the housing stock tells the story of a fast-growing suburb. Homes built in the 1990s around the original Selma plots typically have original fiberglass batts that have settled to under R-20. In Retama Ridge and River Bend, the newer builds have insulation that meets minimum code but leaves attic ductwork exposed in vented attics. That’s a recipe for losing up to 30% of your cooled air before it reaches a single room register.
The climate adds another layer. Selma gets stretches of 95°F-plus heat with humidity that pushes moisture into any attic that isn’t sealed properly. Then a winter freeze hits, and suddenly the uninsulated water lines in exterior walls become a real problem. Homes here don’t need a one-size-fits-all insulation job. They need a hybrid approach: often blown-in fiberglass or cellulose over settled batts, air sealing around penetrations, and insulated ductwork where the original builder skipped it. Our techs see the same patterns block after block, which means we can tell you what’s likely in your attic before we even climb the ladder.
Our Main Selma Services
Most Selma homeowners call us for one of three things: getting attic insulation up to a level that actually handles Texas summers, sealing an attic floor with spray foam where ductwork and air leaks are costing real money, or pulling out old damaged insulation so the space can start fresh. Each service has its own Selma page with deep detail on local conditions, pricing, and what a typical job looks like.
Attic Insulation in Selma
Most attics we see in Selma are sitting around R-20 when they should be at R-38 or higher. That gap is where your cooling budget goes. We blow in fiberglass or cellulose over the existing layer, air seal the penetrations that let hot attic air press down into your living space, and leave you with a written R-value verification. The job usually takes a day, and the difference shows up on the next summer bill. Get the full breakdown on our Attic Insulation in Selma page.
Spray Foam Insulation in Selma
In Selma, the standout spray foam job is sealing the attic floor, not the roofline. Most homes here have vented attics with AC ducts running through them, and those ducts are often uninsulated or under-insulated. Spray foam applied to the attic floor creates an air barrier that stops hot, humid attic air from pressing into the house while keeping your conditioned air where it belongs. It’s a targeted approach that makes sense for the specific construction style dominating Selma. Details are on the Spray Foam Insulation in Selma page.
Insulation Removal in Selma
Older Selma homes sometimes need a full reset. Rodent activity, water intrusion from a roof leak, or decades of dust and debris can leave attic insulation doing nothing useful. We vacuum out the old material, sanitize the space, and prep it for fresh insulation. If you’re not sure whether you need removal or just a top-up, the Insulation Removal in Selma page lays out the signs so you can decide with real information.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
We install and service insulation from brands like Owens Corning, Icynene, and Demilec, with common Selma materials stocked locally for fast turnaround. If your attic has a specific brand and you want to know whether it’s doing its job, we can tell you. See the full list on our brands page.
Pricing for Insulation Company in Selma, TX
| Service | Typical range in Selma |
|---|---|
| Attic insulation (blown-in fiberglass, top-up) | $900 – $2,400 |
| Attic insulation (full replacement, 1,500 sq ft) | $2,400 – $4,500 |
| Spray foam attic floor sealing | $1,800 – $3,600 |
| Spray foam roofline (encapsulated attic) | $4,500 – $9,000 |
| Insulation removal (full vacuum, 1,500 sq ft) | $1,200 – $3,000 |
| Insulation removal + replacement bundle | $3,600 – $7,500 |
| Air sealing package (attic floor penetrations) | $400 – $1,200 |
| Exterior wall insulation retrofit (per wall section) | $600 – $1,800 |
What pushes a Selma price up is usually square footage, how much settled insulation needs to come out first, and whether any ductwork insulation has to be added. The written price you get before work starts is the price you pay. We don’t change it at the door.
Neighborhoods We Serve in Selma
We work throughout Selma, including the 1990s-era streets near the original town center and the newer subdivisions spread across the I-35 corridor. Most Selma calls can be scheduled within a few business days, with emergency insulation removal available sooner when water or pest damage is involved.
- Retama Ridge
- River Bend
- Northcliff
- Olympia Hills
- Selma Park
Service Area – Cities Near Selma
Laurel Attic Insulation also serves homeowners in nearby San Antonio communities. If you’re located just outside Selma, you can find details for San Antonio, TX, Converse, TX, Leon Valley, TX, or Alamo Heights, TX on their respective pages.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Selma
Most Selma appointments are scheduled within two to four business days. Emergency removal for water or pest damage gets priority scheduling. Call (254) 279-0971 and tell us what’s going on, and we’ll give you a real arrival window, not a four-hour guess.
Attic insulation and removal almost never require HOA approval since the work is interior. Some Selma HOAs do have rules about visible roof vents or spray foam roofline modifications. If you’re in a neighborhood with an active HOA, we can tell you what’s typically needed for your specific job.
Yes, both. The older 1990s homes usually need removal or a top-up to reach current R-38 standards, while newer Selma builds often benefit from air sealing and duct insulation the builder skipped. The approach is different for each, and our techs know which one applies to your street.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Selma Customers Say
"Easy to book and easy to pay. The invoice came by text and I paid it from the driveway."
- Rudy B."Good job. The crew arrived about 30 minutes late, but the tracker showed it."
- Pete K."Utility bill dropped the next month. Our summer electric bill was lower by a visible amount."
- Gary J.